Pioneer AVIC-X3-II - Manual (Page 7)

Notice for the blue/white lead
! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp
’s system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-aerial
relay control terminal or the aerial booster
power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
Parts supplied
The display unit Connector
The hide-away unit Power cord
Extension lead
(for reverse signal)
Extension lead
(for speed signal)
30-pin cable GPS aerial
Extension aerial cable RCA connector
Lock tie
Connecting the System
Engb
7
English
Section
03