Pioneer AVIC-S2 RU - Manual (Page 29)

4.3.5 Cursor (No. 7)
As described earlier (Page 19), if you tap the map somewhere or select one specific
item in Destination, it will become the selected point on the map, marked with a small
red dot and radiating red circles to make it visible. You can use this point as starting
point, via point or destination for your route, you can search for a POI near it, mark it
with a pin, or save it as a POI.
Note: When GPS position is available, the Back button will appear indicating that you
have disabled Lock-to-Position. Tapping the Back button will re-enable the position
lock and move the cursor back to the current GPS position.
4.3.6 Map scale (No. 8)
The scale indicator is only available on the Map screen. In 2D map view it represents
the scale of the map. In 3D view it is the scale of the nearest part of the map only.
You can use it in both 2D and 3D modes to scale the map. Drag and pull it right to
zoom in, or left to zoom out.
4.3.7 Navi button - Menu (No. 9)
This button opens the Menu with the Find Destination engine, the Display menu, the
Route menu, and the Settings button. The Menu will be described in detail later:
Page 38.
4.3.8 Map orientation and Overview (No. 10)
You can view the map screens in three different presentation modes. This switch will
cycle through them in the following order.
The usual map orientation for navigation is Track-up. It means AVIC-S2 rotates the
map during navigation to always face the direction of your travel. In this mode an
arrow (compass) points towards North.
Tap this icon to switch to North-up mode. Now the map is fixed to keep facing North.
The icon changes to show the new rotation mode.
29