Show excluded stations, Sorts events by distance / type, Use traffic information – Pioneer AVIC-S2 RU User Manual
Page 52: Recalculate to avoid traffic, Road safety cameras, 3 show, Excluded stations, 4 sorts events by distance / type 4.6.2.5 use, Traffic information, 6 recalculate
4.6.2.3 Show excluded stations
This button opens the list of excluded radio stations. Tap any of the stations in the
list, then tap Enable to allow AVIC-S2 to accept TMC information from this station.
4.6.2.4 Sorts events by distance / type
The list of traffic events can be ordered by their distance from the current position, or
by their type. Tap this button to toggle between the two possibilities.
4.6.2.5 Use traffic information
This button is enabled by default, which means that TMC messages are used in
route planning. Tap this button to have AVIC-S2 ignore real-time traffic information
when planning routes.
Tip: If you make a route planning for a future journey, it may be better to turn off
TMC corrected route planning.
4.6.2.6 Recalculate to avoid traffic
This setting is similar to the previous one. Disabling it will not prevent the system
from using TMC data for route planning, but will not trigger an automatic
recalculation when the traffic conditions change during your journey.
4.7 Road safety cameras
Road safety cameras, such as speed cameras and red light cameras are special POI
types in AVIC-S2. The application can warn you when you approach one of these
cameras. You can fine-tune this warning in General settings (Page 57).
You can save camera locations manually. It is described in detail at the Cursor menu
(Page 32).
To save time, instead of saving them one by one, camera locations can be listed in a
special text file, and copied into the data folder reserved for cameras. You will not be
able to modify or delete these cameras in AVIC-S2. Modify the text file, then restart
the application instead.
Speed cameras are displayed with small camera symbols on the map.
52