Pioneer AVIC-S2 RU - Manual (Page 59)

5.1.2.3 Alternative speeding tolerance
If the speed limit of the current road reaches the value set at Alternative speed limit,
this setting will replace the basic one set at the top of this screen. The slider and the
selector work exactly as the basic ones described here: Page 58.
Example: to let you better understand how this feature works, here is an example. If
you use the settings +10 km/h – 100 km/h – +5%, AVIC-S2 will warn you when
driving at the following speeds:
Speed limit Warning at
40 km/h 50 km/h (=40 km/h + 10 km/h)
60 km/h 70 km/h (=60 km/h + 10 km/h)
90 km/h 100 km/h (=90 km/h + 10 km/h)
100 km/h 105 km/h (=100 km/h + 5%)
120 km/h 126 km/h (=120 km/h + 5%)
160 km/h 168 km/h (=160 km/h + 5%)
5.1.3 Enable Safety Cameras
AVIC-S2 can warn you when you approach known speed and red light cameras
previously uploaded or copied into the device, or saved manually in the software.
You can save cameras using the POI button in the Cursor menu (Page 32), and then
the Add Cam button. The types and parameters of speed cameras are explained
here: Page 52.
If you turn on this switch, AVIC-S2 will open a new screen to let you fine-tune the
way AVIC-S2 warns you when you approach one of these cameras.
Note: Detecting the location of speed cameras may be prohibited by law in certain
countries or regions. Be sure to check if it is legal to turn on this warning or not
before doing so.
5.1.3.1 Audible Warning
You can disable the audible warning; have a simple warning (when you are warned
only if you exceed the speed limit when approaching a camera); or a complex sound
with repeated beeps as you approach the camera. In case of section control
59