Pioneer AVIC-S2 RU - Manual (Page 55)

These cameras are displayed with the following symbol:
4.7.2 Controlled traffic direction
The different cameras can measure the speed of one direction of the traffic, both
directions, or even several directions in an intersection, when they are mounted on a
rotating base. AVIC-S2 warns you only if you drive in a measured or possibly
measured direction.
The measured directions of the cameras are displayed with the following symbols:
4.7.3 Speed limit checked
As additional information, the speed limit checked by the camera is given for fixed,
built-in and section control cameras. When you manually save a camera location
from the Cursor menu (Page 32), the speed limit of the road (if available) is used by
default, but you can change this value with the given control:
4.7.4 Add a new camera or edit an existing one
You can add new cameras, modify the parameters of existing ones, or delete them.
Select a point on the map, then use the POI button in the Cursor menu (Page 32).
This will open the list of POIs around the selected map point. To add a new camera,
use the Add Cam button, and set its parameters. To edit an existing camera, find it at
the end of the POI list, and tap it. A new screen will open with its details. Tap Delete
on this screen if you wish to cancel the camera.
55