Pioneer AVIC-S2 RU - Manual (Page 57)

5 Settings
AVIC-S2 provides several settings in order to let you customise the functions of the
program. The Settings screen can be accessed directly from the map screens by
using the battery icon (Page 31), while some of its sub-screens are accessible from
other parts of the program.
5.1 Safety settings
These are the driving safety settings of AVIC-S2.
5.1.1 Safety Mode
Safety mode will disable the touch screen above 10 km/h (6 mph) to keep your
attention on the road.
You are still able to use the hardware buttons, but you cannot set a new destination
or change the settings.
When you disable Safety Mode, AVIC-S2 will warn you.
WARNING: Safety Modeshould not be disabled when driving alone. Do not operate
this Navigation System if doing so in any way will divert your attention from the safe
operation of your vehicle or other mode of transportation. Only a passenger should
program/operate this Navigation System while a vehicle is moving. A driver should
use voice guidance (when available) or glance at the screen only when it is
necessary and safe to do so. If prolonged viewing of the screen or
programming/operation of the unit is required by the driver, do so only when the
vehicle is parked in a safe location. Always observe safe driving/operating rules and
follow all existing traffic regulations.
57