Pioneer AVIC-S2 RU - Manual (Page 60)

cameras, you will also hear these beeps while you are between the two cameras
(these cameras work in pairs).
You are warned well in advance. The distance AVIC-S2 starts warning you before
reaching the camera depends on your speed. The higher the speed, the earlier the
warning starts.
5.1.3.2 Visible Warning
Besides this, AVIC-S2 can pop up a visual warning with only the symbol of the
camera above the speed limit sign on the Cockpit screen, or you can ask for details
as described below.
Approaching a fixed or built-in camera you will see the speed limit checked by the
camera, and the remaining distance to reach the area monitored by the camera.
With mobile cameras you can only see the distance from the measured area, as
there is no speed limit set.
When approaching the first of section control camera pairs you will see the same
data as with a fixed camera (speed limit and distance). Then while being between
the two cameras, your frequently updated average speed is displayed below the
speed limit.
5.2 Map Colour settings
You can set a few parameters determining the appearance of the maps in AVIC-S2.
5.2.1 Daylight / Night colour profile
AVIC-S2 comes with different colour schemes for both daylight and night use. There
is always one selected daytime scheme and one selected night-time scheme. AVIC-
S2 uses these when switching from day to night and back.
Tap the appropriate button and select a new scheme from the list.
60