Pioneer HTP-SB300 - Manual (Page 17)

Controls and displays 03
17
En
English
Deutsch
Italiano
Español
Pyccкий
Français
Nederlands
Remote control
1  SYSTEM
Switches the system between standby and on.
2
Switches the remote to control the system.
Also use to adjust the Audio parameters
(page 23).
3 INPUT SELECT
Use to select the input source.
4 SOURCE
Press to turn on/off other components
connected to the system (see page 29 for more
on this).
5 INPUT SELECT buttons
Use to select the input source. Switch the
remote control to operate any other components
allocated to the selected buttons (see
Controlling the rest of your system on page 26).
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the
button. Thus if you
only have one TV to hook up to this system
assign it to the
button (see page 28
for more on this).

Use to turn on/off the power of the TV.
INPUT
Use to select the TV input signal.
Press to select control of TV. Also use to
input a preset code allocated to the
TV
CONTROL button.
CH +/–
Use to select channels.
VOL +/–
Use to adjust the volume on your TV.
7 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(Auto playback on page 20) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 22).
SYSTEM SYSTEM
TV CONTROL
HDMI1 HDMI2
OPTICAL
LISTENING MODE
COAXIAL
STANDARD
AUTO/
DIRECT
STEREO/
A.L.C.
ADV SURR
CH
VOL
BD MENU
DIMMER
DISPLAY
SURROUND SYSTEM
CH
CH
ENTER
ENTER
MUTE
SOURCE INPUT
INPUT
INPUT
TV CODE
1 4
3
2
5
7
9
10
12
14
11
13
15
16
6
8
HTP-SB300_SVYXCN_En.book 17 ページ ２００９年１０月２３日 金曜日 午後１時５８分