Pioneer HTP-SB300 - Manual (Page 18)

Controls and displays 03
18
En
STEREO/A.L.C.
Switches between stereo playback, Auto
level control stereo mode (page 21) and
Front Stage Surround Advance modes
(page 22).
STANDARD
Press for Standard decoding and to switch
between
2 Pro Logic II options (page 21).
ADV SURR
Switches between the various surround
modes (page 21).
8 DIMMER
Dims or brightens the display. The brightness
can be controlled in four steps.
First use INPUT SELECT button to select the
input for the desired connected Blu-ray disc
player, then access the following:
BD MENU
Displays the disc menu of Blu-ray Discs.
9 System and component control buttons
Press first to access:
AUDIO PARAMETER
Use to access the Audio options (page 23).
RETURN
Confirm and exit the current menu screen.
First use INPUT SELECT button to select the
input for the desired connected component,
then access the following:
TOP MENU
Displays the disc ‘top’ menu of a BD/DVD.
HOME MENU
Displays the HOME MENU screen.
RETURN
Confirm and exit the current menu screen.
MENU
Displays the TOOLS menu screen of Blu-ray
Disc player.
10
, ENTER
Use the arrow buttons when setting up your
surround sound system (page 23). Also used to
control BD/DVD menus/options.
11 MASTER VOLUME +/–
Use to set the listening volume.
12 Component control buttons
The main buttons (
 ,  , etc.) are used to
control a component after you have selected it
using the input source buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding input source button. These
buttons also function as described below.
Press first to access:
DTV/TV
Switches between the DTV and analog TV
input modes for Pioneer flat screen TVs.
13 MUTE
Mutes/unmutes the sound.
14 Number buttons and other component
controls
Use the number buttons to directly select the
tracks on a CD, DVD, etc.
HDD*, DVD*, VCR*
These buttons switch between the hard
disk, DVD and VCR controls for HDD/DVD/
VCR recorders.
15 DISPLAY
Switches the display of this unit. The input
name, listening mode or sound volume can be
checked by selecting an input source.
16 SHIFT
Press to access the ‘boxed’ commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (* ) in this section.
HTP-SB300_SVYXCN_En.book 18 ページ ２００９年１０月２３日 金曜日 午後１時５８分