Lfe attenuator setting mode, Low cut filter on/off setting mode, Front speakers distance setting mode – Pioneer VSX-D510 User Manual

Page 13: Center speaker distance setting mode, Preparations

Advertising
background image

13

En

MEMO:
• The initial setting is “

100 Hz

”.

• If all speakers (front, center, and surround) are set to

“Large” in SPEAKERS setting mode, the crossover
frequency cannot be set because there are no “Small”
speakers (

***

appears in the display).

LFE attenuator setting mode

Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the LFE attenuator as needed to prevent
the ultra-low bass tones from distorting the sound from
the speakers.

Press

% or to set the attenuation level (0

dB, 10 dB or ** dB(

)).

10 dB

0 dB

(display "

**

")

MEMO:
• The initial setting is “

0 dB

”.

• When

is selected (

**

appears in the display), LFE

is not available.

Low cut filter ON/OFF setting mode

Turn the low cut filter

ON

when distorted sound is

output through the subwoofer.

Press

% or to select low cut filter ON or

OFF.

MEMO:
• The initial setting is “

OFF

”.

• If the SUBWOOFER is set to “

OFF

” in the

SUBWOOFER ON/OFF setting mode, the low cut
filter cannot be set.

FRONT speakers distance setting
mode

Sets the distance from the FRONT speakers to the
listening position.

Press

% or to set the distance of the

FRONT speakers from the main listening
position (within a 9.0 m range).

MEMO:
• The initial setting is 3.0 m.
• One step equals about 0.3 m.

CENTER speaker distance setting
mode

The center speaker is normally placed directly in front of
the listening room and is thus closer to the listening
position than the Front speakers. This means that the
sound from the center speaker will be heard before the
Front speakers. To prevent this, set the center speaker
distance setting to delay the sound from the center
speaker so that the sound from the Front and center
speakers will be heard at the same time.

Press

% or to set the distance of the

CENTER speaker from the main listening
position (within a 9.0 m range).

MEMO:
• The initial setting is 3.0 m.
• When “

C

*

” is selected in SPEAKERS setting mode,

the center distance cannot be set.

• One step equals about 0.3 m.

Preparations

Advertising