Naming memorized stations 26, Recalling memorized stations 26, Using the tuner – Pioneer VSX-D510 User Manual
Page 26: 1 press, Repeatedly to select the class, 3 press, 6 press, 1 press the, Button on the remote control or turn the, On the receiver to select the tuner mode. 2 press
26
En
Naming Memorized Stations
You can input a name of up to four characters for each
preset station in the receiver’s memory. This name can be
anything you choose. For example, you could input
"BBC1" for that station and when you listen to it the
name, rather than the frequency number, will appear on
your display.
1 Press
BAND
to set the tuner function.
2 Press
CLASS
repeatedly to select the class.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
3 Press
STATION +/–
to select the preset
channel.
4 Press
CHARACTER/SEARCH
to select the
character input mode.
5 Press
STATION +/–
to choose the first
character.
The
STATION +/–
buttons scroll through the letters,
numbers and symbols you can input.
SP A
STEREO
TUNED
6 Press
MEMORY
to input the first of the four
characters.
That character appears in the display and the cursor
automatically moves to the next space.
After four characters have been entered, the character
input mode is exited.
Repeat steps 2 to 6 to memorize up to 30 preset
broadcast station names.
SP A
STEREO
TUNED
To erase or change the station name
Perform the procedures of “Naming Memorized
Stations” and enter four spaces to erase the memorized
station name.
When you want to change a memorized station name,
input the new station name using the same procedure.
6
2
1
3,5 4
2 3
1
Recalling Memorized Stations
Having memorized up to 30 stations (see this page for
how to do this), preset stations can be easily recalled.
1 Press the
MULTI CONTROL TUNER
button on
the remote control or turn the
MULTIJOG
DIAL
on the receiver to select the tuner
mode.
2 Press
CLASS
to select the class in which the
station is stored.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
3 Use the
STATION +/–
buttons to select the
station memory in which the station is
stored.
Alternatively, recall the station memory using the
number buttons on the remote control.
MEMO:
• If the receiver is left disconnected from the AC power
outlet for a lengthy period, the station memories will
be lost and will have to be reprogrammed.
DVD/LD TV/SAT VCR/DVR CD
D.ACCESS
ATT
VOL
MENU
TOP
MENU
VOL
CH
2
DSP MODE MIDNIGHT 5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
FQ
FQ
ST
ST
TV CONTROL
FUNC
SIGNAL
SELECT
TEST
TONE
RECEIVER TUNER TV CONT
1
2
3
4
5
6
7
8
9
0
SOURCE CLASS MPX BAND
10 DISC
CHANNEL
DISPLAY RF ATT
2
1
3
3
Using the Tuner