Bajaj Electricals DB30 - Manual (Page 16)

13
1. Ensure there is fuel in fuel tank and oil in crank case.
2. Set fuel valve lever to “ON” position
3. Place choke lever to “ON” position
4. Start engine with pull start cord.
5. Allow engine to idle until engine is warm
6. Place carburetor choke lever to “OFF” position when engine has sufficiently
warmed up.
Procedures for stopping engine:
1. Release throttle twist grip to slow down engine.
2. Depress stop button located on right hand grip. Depress button until engine
comes to a complete stop
3. Set fuel valve lever (the fuel tank valve) handle to “OFF” position.
CAUTION
Unnecessarily increasing RPM’s to a high level while the Mini Bike is
warming up is harmful to the engine.
CAUTION
Verify fuel and oil level prior to starting (see pages 11 and 14)
Starting the engine with low or no oil will damage the engine.
WARNING
Never start the engine in a closed place as the exhausted gas
from the vehicle contains toxic carbon monoxide.
Fuel valve lever
ON
Choke Lever
OFF ON
OFF
ENGINE STARTING AND
STOPPING
OFF
ON