Inspection and maintenance, Checking the oil – Bajaj Electricals DB30 User Manual

Page 17

Advertising
background image

14

CHECKING THE OIL

Check engine oil each time prior to operating mini bike.

The oil level should be between upper and lower lines of oil gauge.

1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil

gage rod clean and then insert the gage plug into the crankcase again to

check the oil level. There is no need to screw the oil gage plug completely in

the hole to check the oil.

2. Add lubricating oil up to the edge of the fuel plug.

3. Screw oil gage plug tightly.

Lubricating Oil Recommended

The lubricating oil is an important factor affecting the performance and service life

of the engine. Please refer to the chart for the correct grade of engine oil based on

the environmental conditions in your area. Do not use any other type of oil other

than what is recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.

.45L (.40qt.) Oil

Lubricating oils of different

viscosity shall be employed

in different regions and at

different temperatures.

CAUTION
Never start the engine when there is insufficient lubricating

oil. Otherwise, it will cause harm to the engine.

Oil dip stick

MACHINE

OIL

TEMP.

°C

°F

-30

-22

40

104

-20

-4

-10

14

0

32

10

50

20

68

30

86

20W-40 20W-50

15W-40 15W-50

10W-40

10W-30

INSPECTION AND MAINTENANCE

Advertising