Inspection and maintenance, Resumption of service after storage, Table and torque of fasteners – Bajaj Electricals DB30 User Manual

Page 26

Advertising
background image

23

RESUMPTION OF SERVICE AFTER STORAGE

1. Remove the covering and remove the wooden blocks used in storing the

vehicle. Change the engine oil if the vehicle has been out of service for over 4

months.

2. Drain off the remaining atomized anti-rust oil from the fuel tank, followed by

filling it with fresh gasoline therein.

3. Prior to driving, all the required check-ups must be made. It is better to

drive it at a low speed in an open area to test its performance before normal

operation.

TABLE AND TORQUE OF FASTENERS

Ser. No.

Fastener

Torque (Newton/m) (Foot/lb)

1

Front wheel axle nut

35-45Nm (26-33 ft.lb.)

2

Rear wheel axle nut

35-45Nm (26-33 ft.lb.)

INSPECTION AND MAINTENANCE

Advertising