Inspection and maintenance, Instructions for storage – Bajaj Electricals DB30 User Manual

Page 25

Advertising
background image

22

INSTRUCTIONS FOR STORAGE

If the vehicle is not going to be used for a long period of time, for example, in

winter time, some steps should be taken to prevent malfunction of and damage to

its components which might be caused by long storage. Before storing the vehicle

for a long period , proper maintenance has to be carried in case maintenance is

not completed when the vehicle is put back into use after storage.

1. Change engine oil.

2. Drain off fuel from the fuel tank and carburetor, spray atomized anti-rust

oil onto the inside wall of the tank and then close the tank. Dispose of any

drained fuel properly so as not to adversely affect the environment.

Attention:

If the storage will last for more than one month, fuel in the carburetor must be

fully drained. This will help ensure that the carburetor maintains its normal

performance after the storage.

3. Take out the spark plug, pour about 15-20ml (.5 - .68 oz.) of clean engine oil

into the cylinder, step down on the kick lever repetitively several times so as

to have machine oil distributed all over the engine and finally fit the spark

plug back on.

4. Wash the vehicle clean, wipe it dry and apply an even coat of wax to the

painted surface and a coat of anti-rust oil on the chrome-plated surfaces.

5. Inflate the tires as required and put the vehicle up on wooden blocks with the

two wheels clearing the ground.

6. Put the vehicle in a shady and cool place free from humidity and direct

sunlight and cover it properly (not with plastic or other painted materials). If

there is a garage, store it within.

WARNING

Gasoline is flammable and may cause fire and even an explosion under

certain conditions. Therefore, do not smoke, make a fire or have any fire

around while draining off fuel.

Carburetor Drain screw

INSPECTION AND MAINTENANCE

Advertising