Toshiba Tecra M4 - Manual (Page 163)

TECRA M4 8-5
Optional Devices
Formatting an SD memory card
SD memory cards are sold with format in conformity to the Standards of SD
memory card. If you format the SD card again, be sure to format it with the
utility of TOSHIBA SD memory card format, not in the format defined as the
Windows standard format.
In order to run TOSHIBA SD memory card format, click start, point to All
Programs, point to TOSHIBA, point to Utilities and click SD memory card
Format.
TOSHIBA SD memory card format does not format the protected area of
SD memory card. When you format all area of the SD memory card
including the protected area, use the application that responds to the copy
protection system.
Inserting an SD card
To insert an SD card, follow the steps below.
1. Insert an SD card in the SD card slot.
2. Press gently to ensure a firm connection.
Inserting an SD card
Removing an SD card
To remove an SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the SD card and release it to pop the card out slightly.
SD card
SD card slot
Make sure the SD card is oriented properly before you insert it.