Toshiba Tecra M4 - Manual (Page 36)

TECRA M4 1-19
Introduction
Advanced Port
Replicator III
The Advanced Port Replicator III provides the
ports available on the computer in addition to
separate PS/2 mouse and PS/2 keyboard ports,
a digital visual interface (DVI) port, i.LINK™
(IEEE1394) port, line-in jack and line-out jack,
External monitor port, Universal Serial Bus port
(USB2.0) × 4, LAN jack, Modem jack, Serial port,
Parallel port.
The TECRA M4 does not support the PS/2 port and Serial port on the
Advanced Port Replicator III.
Tablet PC Pen Tablet PC Pen can be purchased from your
TOSHIBA dealer. Use it as a spare to your
computer.
Spare pen tip and draw-out tool are included.
Reserve Pen Reserve Pen can be purchased from your
TOSHIBA dealer. Supplied pen uses a pen
instead of Supplied pen at the time of loss or
breakage. The pen is set inside the computer,
which connects a battery pack.
Bluetooth 2.0
module Kit
This option enables Bluetooth (Version 2.0)
wireless communications in computers that do
not have Bluetooth preinstalled. It is installed by
dealers only.
Bluetooth SD card3 Bluetooth SD card is an optional accessory
compatible with the SD card slot of this computer.
You can buy the card from TOSHIBA dealer.
Bluetooth USB
adaptor
A Bluetooth adaptor that has a USB connector.
Wireless communications can be carried out with
Bluetooth-compatible equipment by connecting
to the USB port of the computer.
You can buy the module from TOSHIBA dealer.
Mobile HDD A mobile external hard disk drive that is
compatible with USB2.0. Data can be read and
written by connecting to the USB port of the
computer.
You can buy the module from TOSHIBA dealer.