Barco DICOM THEATER LITE MGP D5 - Manual (Page 105)

Driver re-installation, updates or removal
106 MGP D5 Dicom Theater Lite
3. To update the driver, clear the checkbox next to “DPMS
Screen Saver” (figure 44) and click “Install”.
Figure 44
4. For Windows 2000 or Windows XP please turn to Step 6 on
page 40 in the section titled “Windows 2000 BarcoMed
2MP2CP software installation” and follow the instructions
to finish reinstalling or updating your BarcoMed 2MP2CP
driver.
When the driver has finished installing, click “Finish”. Then click
“Finish” again.
Reboot the system when prompted and then reset the resolution
of your displays if necessary.
Uninstalling the BarcoMed 2MP2CP driver
Special Note: The BarcoMed Uninstaller is supported only on
Windows 2000 and Windows XP.
To remove the BarcoMed 2MP2CP display controller driver from
your system you must be logged in using an account with
administrator privileges.