Barco DICOM THEATER LITE MGP D5 - Manual (Page 91)

Using TheaterWatch
92 MGP D5 Dicom Theater Lite
5. Select “Using the BARCO LCD sensor” and click OK.
This option is grayed in case TheaterWatch does not find a
connected Barco LCD sensor.
6. Follow the guidelines on the screen to complete the
calibration successfully.
Note:
If the Equalization option is set in the Application Settings
and TheaterWatch finds at least one other display of the
same type that is calibrated, the “Match with reference”
page appears during the calibration process.
Figure 35: Match with reference
To equalize the display, check the option “Match this display
with display....” and click Next. The display number that
appears in this option, refers to the reference display.