Barco DICOM THEATER LITE MGP D5 - Manual (Page 41)

Windows 2000 BarcoMed 2MP2CP software installation
42 MGP D5 Dicom Theater Lite
Figure 13
Click “OK” to install the new driver. If you don’t want to
replace the exiting driver, click “OK” and then click
“Cancel”.
7. The “Device Confirmation” screen displays the device driver
that will be installed. If you want to change your selection,
click “Back” to return to the Device Selection Screen. Click
“Next” to begin installing the driver. Click “Cancel” to abort
the driver installation.
Caution: Once you click “Next”, you cannot cancel the driver
installation.
Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed
your display may flicker. Click “OK” to continue.
8. When the screen shown in figure 14 below and figure 15 on
page 43 appears, click “Yes” or “Continue Anyway” to
continue. This screen may appear multiple times.
Figure 14: Windows 2000 Digital Signature Not Found Warning