Barco DICOM THEATER LITE MGP D5 - Manual (Page 97)

Using TheaterWatch
98 MGP D5 Dicom Theater Lite
Displays tab
Figure 40: Displays tab
In this dialog you get a list of Barco display and projector types
compatible with TheaterWatch.
If you wish certain displays from your system not to be controlled
by TheaterWatch (e.g., because you wish to control them with
MediCal Pro), you must deselect them in the list.
There may be systems where both TheaterWatch and MediCal Pro (Barco’s
image conformance and consistency software) are used. MediCal Pro may be
used to control and calibrate the displays and TheaterWatch to control and cali-
brate the projector.
In that case, there may be a conflict between TheaterWatch and MediCal Pro:
At start-up of the system, TheaterWatch automatically recognizes the con-
nected displays and uploads the display function and luminance selected in
TheaterWatch. In this way, TheaterWatch overwrites display function and lumi-
nance that was set and calibrated by MediCal Pro.
To avoid this, deselect the display types controlled by MediCal Pro, and they
will be ignored by TheaterWatch.