Beyonwiz DP-H1 - Manual (Page 27)

STB & PVR Function
17
4. Quick Setup
This chapter guides you through the basic set up of the DP-H1 so that
you can experience its basic feature. In order to enjoy the DP-H1 fully,
please refer to Chapter 9. Advanced Setup.
1. Start Quick Setup
If A/V and antenna connection is complete, press the STANDBY button
to start. The front display window will show “Welcome”, “Loading” and
“Start” successively.
If you turn on the DP-H1 for the first time after purchasing, there will
be no digital broadcasting services stored in the DP-H1, it will switch to
SETUP MENU automatically by showing “Service Scan” on the front
display window. Otherwise, you can enter SETUP MENU by pressing the
SETUP button.
If there is a list of the digital broadcasting services stored in the DP-H1,
the front display window will display the service name such as “TEN
Digital” when it is ready to use.
NOTE
z If the front display shows “Service Scan”, you have to scan the
broadcasting services first. Please refer to the next section of
scanning services.