Beyonwiz DP-H1 - Manual (Page 28)

STB & PVR Function
18
1-1. Quick Setup of Video Output Format
If the front display window indicates that the DP-H1 is ready to use but
nothing displays on the TV screen, you have to adjust the format and
resolution of the video output by pressing the TV-OUT button. The
default video output is in a SD PAL (576i) format. You can switch the
video output to a SD NTSC (480i), HD PAL (720p), HD NTSC (720p),
HDMI PAL (1080i), HDMI NTSC (1080i), PAL HDMI Auto, NTSC HDMI
Auto, HDMI PAL (576p) and HDMI NTSC (480p) format successively
with the TV-OUT button. Please refer to the following information to
adjust the video output to each of the video connection types.
z
Composite/S-VHS: SD PAL or SD NTSC
z
Component: HD PAL or HD NTSC
z HDMI: PAL HDMI Auto, NTSC HDMI Auto, HDMI PAL or HDMI NTSC
NOTE
z The TV-OUT button is developed so that you can configure the video
output of the DP-H1 when you can not see anything on the TV screen
because the video formats do not match each other.
z
Most TV sets support the PAL format in Australia..
z
The front display window indicates the current video format as you
press the TV-OUT button.
z Please allow 3 seconds after pressing the TV-OUT button for the
configuration change to become effective.
z
It is strongly recommended that you again configure the video format
more precisely in the Setup menu.