Beyonwiz DP-H1 - Manual (Page 39)

STB & PVR Function
29
3. Network
The DP-H1 supports an Ethernet interfaces. This section will guide you
how to configure the network interfaces.
3-1. Ethernet Setting
The first step is to enable the Ethernet interface. You can select this in
the Network Device menu. You will get a pop-up menu by pressing the
OK button. If you want to use the Ethernet interface, please select the
“LAN” option. If you select “Disable” option, the Ethernet interface will
be disabled even though you configure it properly.