Beyonwiz DP-H1 - Manual (Page 67)

STB & PVR Function
57
2) When New Recording Starts
If a new recording starts according to a timer while the DP-H1 records
two programs simultaneously, the following pop-up will be displayed.
There are two options you can choose if duplication occurs: you can
stop one of the current recordings to let a new recording start. Else you
can cancel the new recording or timer recording and let the current two
recording finish properly.
To stop one of the current recordings and start a new recording, choose
a recording to cancel with the UP/DOWN buttons and press the OK
button. If you don’t want to stop any recordings, press the EXIT and
cancel the new recording.
3) New Timer Overlaps Existing Timer
Because the DP-H1 checks recording conflict only with timers when you
set a new timer, you can set a new timer which records and overlaps
the same program being recorded. In this case, conflict will occur when
a new recording starts according to the timer.
You can stop the existing recording and start new recording by pressing
the OK button. If you do not want to start a new recording, please
press the EXIT button.