Beyonwiz DP-H1 - Manual (Page 65)

STB & PVR Function
55
4) Delete Timer
Select a timer which you want to delete with the UP/DOWN buttons
and press the GREEN button. A pop-up confirmation will appear and
choose “Yes” with the OK button. If you do not want to delete a timer,
choose “No” with the OK button or press EXIT.
NOTE
z
You cannot edit or delete a timer which is being recorded.
5) Turn On and Off the DP-H1 according to Timer
If a timer starts when the DP-H1 is in standby mode, the DP-H1 is
turned on automatically and performs its operation according to the
timer. Once the timer is ended, a pop-up message will appear to ask if
you are operating the DP-H1 or not. If there is no confirmation to turn
off, the DP-H1 will be turned off and go into standby mode. If you want
to use the DP-H1 continuously, select “No” on the screen and press the
OK button. You can also cancel it by pressing the EXIT button. If you
are watching a program and a timer recording has started you can not
put the DP-H1 into standby until the recording has finished or is
stopped by the user.
NOTE
z
If the AC power is not supplied to the DP-H1 properly, it can not
perform the timer recording. If a timer fails due to this reason, this
timer remains in the timer-list for you to check it.
z After the AC power is back from a blackout while the DP-H1 is
recording a program according to a timer, it restarts the timer
recording if it has to do.