Beyonwiz DP-H1 - Manual (Page 58)

STB & PVR Function
48
3-3. Instant Recording
1) Start Recording
You can record the current service and store it in the USB storage
instantly by pressing the REC button. The following picture shows
options you can choose when you record a program.
z
Duration: You can change the duration of recording with the LEFT
and RIGHT buttons. The default is 120 minutes.
z Starting Point: You can select the starting point of recording with the
LEFT/RIGHT buttons when the time-shift function is enabled. If the
time-shift function is disabled, you can only record from the current
time.
1. Live: Start recording from the time when you press the REC
button.
2. Current Program: Record only the current program even if there
is a previous program stored in the time-shift buffer.
3. All: Record all the programs in the time-shift buffer.
z File Lock: You can lock the recording file if you want. The LEFT/
RIGHT buttons will change this option.
z
File Name: The recording will be stored on the USB storage as a file
with the name of the current program but you can change the file
name if you want. If you press the OK button, an on-screen keyboard
will pop up and you can enter a new file name.
After setting all options, please press the REC button on the remote
control or choose “Accept” button on the screen to start recording. If
you want to cancel the recording, press the EXIT button on the remote
control or “Cancel” button on the screen.