Displaying and changing the cooking time, Changing the temperature, Pause – Neff C47C22N3GB User Manual

Page 11: Displayî, Open the appliance door carefully, Press the start button, Switching off the appliance, Risk of scalding, After each use, Emptying the water tank

Advertising
background image

11

Displaying and changing the cooking time.
Press the

KJ

clock function button repeatedly until the

KJ

and

x

symbols light up. The current cooking time is displayed.

Turn the rotary selector to change the cooking time. The

change is saved automatically.

Changing the temperature
You can change the temperature at any time. To change the

temperature, turn the temperature selector until the required

temperature is displayed.

Pause
Briefly press the Stop button to interrupt cooking (pause). The

cooling fan may continue running. Press the Start button to

restart.
If you open the appliance door during cooking, operation is

interrupted. Close the appliance door and press the Start

button to restart.

If you have switched on the Auto start, there is no need to

restart the appliance (see section: Basic settings).

Display

Î

When the water tank is empty, an audible signal sounds and

the

Î

indicator appears. Cooking is interrupted.

1. Open the appliance door carefully.

N.B.: Hot steam will escape.

2. Remove the water tank, fill up to the "max" mark and slide the

tank back in.

3. Press the Start button.

Switching off the appliance

:

Risk of scalding!

Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to stop the cooking.
If you have set a cooking time, cooking is ended automatically.

A signal sounds. Press the

KJ

clock function button to stop

the signal.

The cooling fan may continue to run when you open the

appliance door.
Turn the operating mode selector back to the

Û

position and

push it in to turn off the appliance.
You can see in the temperature display whether there is high or

low residual heat in the cooking compartment.

After each use

Emptying the water tank.

1. Open the appliance door carefully.

Hot steam will escape.

2. Remove and clean the water tank.
3. Thoroughly dry the seal in the tank cover and the tank recess

in the appliance.

Caution!
Do not dry the water tank in the hot cooking compartment. This

will damage the water tank.

Drying the cooking compartment

:

Risk of scalding!

The water in the evaporator dish may still be hot. Allow it to cool
before wiping.

1. Leave the appliance door ajar until the appliance has cooled

down.

2. Once it has cooled down, wipe out the cooking compartment

and the evaporator dish with the enclosed cleaning sponge

and dry well with a soft cloth.

3. Remove food residues from the cooking compartment as

soon as the appliance has cooled. Burnt-on remains will be

much harder to remove later.

4. Wipe kitchen units or handles if condensation has formed on

them.

Electronic clock

In this section, you can read about

how to set the timer

how to switch your appliance off automatically (cooking time

and end of operation)

how to switch your appliance on and off automatically (preset

operation)

how to set the time

Clock display

Temperature display

Meaning

Residual heat high

œ

Residual heat low

&ORFN IXQFWLRQ EXWWRQ

5RWDU\ VHOHFWRU

Advertising