Neff C47C22N3GB - Manual (Page 6)

6
Your new appliance
In this section, you will find information on
■
the control panel
■
the operating modes
■
automatic calibration
Control panel
Pop-out operating knob
The rotary, temperature and operating mode selectors can all
be popped out. Push the required operating knob to pop it in or
out.
Control element Use/meaning
Operating mode selector Switching the appliance on and off
Selects the desired operating mode
Electronic clock
KJ Clock function button Selects the clock function (see section: Electronic clock)
Rotary selector Makes settings within a clock function (see section: Electronic clock)
Symbols
Ì Emptying the evaporator dish If the symbol Ì lights up: Remove the remaining water from the evaporator dish.
Í Descaling When the Í symbol flashes, the appliance needs descaling
(see section: Descaling)
Î Fill the water tank When the symbol Î lights up, fill the water tank or change the water in the water
tank (e.g. during descaling)
Temperature display (Basic settings)
± Info button Press briefly: calls up additional information, for example the current temperature
during the heating up phase
Press and hold: calls up the Basic settings menu (see section: Changing the Basic
settings)
Temperature selector Sets the temperature
Changes the settings in the Basic settings menu (see section: Changing the Basic
settings)
Buttons
n Programme button Set the programme or enter the weight (see section: Automatic programmes)
ƒ Start button Starts operation
„ Stop button Short press: stops the operation (pause)
Press and hold: ends the operation
6WRS 6WDUW
3NJ
(OHFWURQLF FORFN 7HPSHUDWXUH GLVSOD\
,QIR EXWWRQ
7HPSHUDWXUH VHOHFWRU 2SHUDWLQJ PRGH VHOHFWRU 5RWDU\ VHOHFWRU
&ORFN IXQFWLRQ EXWWRQ
%XWWRQV
6\PEROV