BT PC Scanner - Manual (Page 27)

PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
25
To print a fax stored in the memory
If you have received faxes into the memory
the Fax in memory light flashes and the
display shows the reason for the document
not being printed normally – PRINTER
ERROR!
, CHECK PAPER! or INK OUT
Either add new paper, clear the jam or
replace the ink cartridge accordingly.
Press Printer Reset. The fax stored in the
memory will print out.
Clear a paper jam, see page 50.
Replace the ink cartridge, see page 51.
Paper jam and out of ink warning:
If the plain paper jams or the ink cartridge
runs out during printing, the display shows
CHECK PAPER
or OUT OF INK.
Clear the paper jam, see page 50.
Replace the ink cartridge, see page 51.
Then press Printer Reset to print out
the document that has been stored in the
memory.
If the memory becomes full while there is
paper in the paper tray:
This happens if the fax is too large for the
PaperJet 300 to handle. Pages received
before the memory became full will be
printed but, you will need to ask the sender
to re-fax the pages you have not received.
Very detailed pages or photos may need to
be sent singly.
Power failure while a fax is stored in the
memory:
If the power fails and a document is stored
in the memory, the stored fax is lost. Your
PaperJet 300 informs you with a power
failure report giving details of any
documents lost from memory. When the
power is restored the display will show
MEMORY DATA LOST .
Printer Reset
Printer Reset