BT PC Scanner - Manual (Page 37)

PaperJet 300 user guide ~ Edition 3.2 ~ 25th july ’01 ~ 3693
35
the PaperJet 300 Software Installer screen
with the options shown below.
If your CD doesn’t run automatically, select
Run from the Start menu, type in
x:\Setup.exe (where x is the letter of your
CD drive) and then click on OK.
To view the user guide, double click on
View Documentation. If you don’t already
have Adobe Acrobat Reader on your PC you
will need to install that first. It is included
on the CD, just double click on that option.
If you want to use your PaperJet 300 only as
a printer then you will need to install the
Printer Driver only.
If you want to use the PC faxing and
scanning features, you will need to install
Unimessage Pro.
You can load either the Printer Driver or
Unimessage Pro or both.
To load the printer driver, double click on
the Printer Driver option. The installer will
load the driver and present the printer
control program window when it has
finished. This window enables you to adjust
the printer settings, clean nozzles and align
ink cartridges and print test pages.
Status: shows details of cartridges, the
current print job and lets you print a test
page.
Options: lets you set your preferences.
Cartridges: shows the status of the
cartridges, lets you clean nozzles and align
the cartridge.
DOS Printing: lets you adjust the settings
for DOS printing.
About: provides program details.
You can make changes if you wish but you
don’t need to for most uses. When you are
ready, click on Close.
You are now presented with a window with
two option buttons: Exit to Windows and
Restart Windows.
If you are not going to load Unimessage
Pro, click on Restart Windows.