Audiovox ONYX - Manual (Page 23)

44 45
5 You’ll first need to find an available FM channel . An available FM
channel is one that’s not being used by an FM radio station in your
area . When you tune your FM radio to an available channel, you should
only hear static or silence – not talk or music . To find an available FM
channel:
• Manually tune through your local FM channels on your vehicle’s FM
radio . Locate and create a list of channels that aren’t being used by any
FM radio station . Write down the list . Once you have created your list
of available FM channels, you will need to find the one that provides the
best match for onyX .
TIP! You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to
tune through every FM channel one-by-one . Turn on your vehicle’s FM radio . Start
at 88 .1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune
through each FM channel one-by-one (88 .1 followed by 88 .3 etc .) to locate
channels that aren’t being used by a local FM radio station . Write down each FM
channel that has only static or silence on it, until you reach 107 .9 .
6 Ensure onyX is tuned to channel 1 . Upon power up, onyX should tune to
channel 1 by default, when it’s not yet activated . If it’s not on channel 1,
refer to “Listening to Satellite Radio” on page 55 to learn about how to
tune a channel .
7 Pick the first FM channel on your list from step 5 . Turn on your vehicle’s
FM radio (if you have not already done so) and tune it to this FM channel .
NOTE! If you are using the Vehicle Dock from the Universal Xpress Car Kit
instead of the PowerConnect Vehicle Dock which came with your onyX, you
will have to disable AUX Detect . Refer to “Using the
Vehicle Dock From the Universal Xpress Car Kit” on
page 96 , and complete the additional instructions
before continuing with the next step .
8 Set your onyX to transmit on the same FM
channel that you have selected in step 7:
i . Press menu .
ii . Press
to scroll to and highlight FM Settings and press the
Select button .
iii . FM Channels will be highlighted . If it is not highlighted, turn on
the FM transmitter by highlighting FM transmitter and pressing
Select .
iv . Once the FM Transmitter is On, select FM Channels and press
to scroll to and highlight the storage location FM2 and
press the Select button .
v . Tune to the available FM channel you found in step 7 . Press
and to tune in steps of .2, i .e ., 99 .3 to 99 .5 . Press and
to tune in steps of 1, i .e ., 99 .3 to 100 .3 . Press the Select button
2 3 4 5 6 7 8 9 0 direct
jump
FM
menu
1
90.1
MATCH FM CHANNELS
Vehicle Installation