Audiovox ONYX - Manual (Page 31)

60 61
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a new FM
channel from them .
Use FM presets when you use PowerConnect to listen to your onyX through your
vehicle’s FM radio . (Refer to “Option 3: PowerConnect Installation Instructions” on
page 43 for more information .)
To start using a different FM preset:
1 Press FM to display the current FM
preset .
2 To display and select the next FM
preset, press FM . The radio will tune
to the displayed FM channel . If the
preset is the one you want, press
menu or wait for the screen to
timeout .
3 Repeatedly pressing FM will cycle
through the FM presets .
4 Set your vehicle’s FM radio to the
same FM channel .
IMPORTANT! You need to ensure that
your vehicle’s FM radio is tuned to the
same FM channel .
Set your vehicle radio to the
above channel to enable audio.
99.3 FM
103.7 FM
Set your vehicle radio to the
above channel to enable audio.
Using Your onyX
TIP! To configure the list of preset FM channels, you need to find available
FM channels in your area . Refer to”Find Available FM Channels in Your Area”
on page 79 . Next, refer to “Set and Select an FM Channel” on page 82 .