Audiovox ONYX - Manual (Page 47)

92 93
Restore Defaults
You can clear all of your personal settings, such as favourite channels, FM
presets etc . and return the radio to its original out-of-the-box settings
To reset onyX to factory defaults:
NOTE! Restoring defaults permanently removes all personal settings .
1 Press menu .
2 Press to scroll to and
highlight Factory Settings and
press the Select button .
3 Press to scroll to and
highlight Restore Defaults and
press the Select button .
4 A warning screen will be
displayed . If you are certain that
you want to reset your onyX to
the default settings, press the Select button to confirm .
If you want to cancel, press menu to return to Factory Settings .
or menu to cancel
Are You Sure?
All settings will be erased.
Press Select to confirm
2 Press to scroll to and highlight Factory Settings and press the
Select button .
3 AUX Detect should be highlighted and show as enabled . Press the
Select button to toggle the setting .
4 A warning screen will be displayed .
Press the Select button to confirm
that you want to disable AUX Detect .
If you want to cancel press menu
to return to Factory Settings . AUX
Detect will remain enabled .
5 AUX Detect will show as disabled .
Press and hold menu to return to the
main display screen .
To enable AUX Detect
(Do this when radio is transferred to the PowerConnect Vehicle Dock from an older
model Vehicle Dock .)
1 Press menu .
2 Press to scroll to and highlight Factory Settings and press the
Select button .
3 AUX Detect will be highlighted and show as disabled . Press the Select
button again to toggle the setting to enabled .
4 Press and hold menu to return to the main display screen .
Disable only if using vehicle dock
from Universal Xpress Car Kit.
Otherwise, leave it enabled.
Disable AUX Detect?
or menu to cancel
Press Select to confirm
Configuring Your onyX