Audiovox ONYX - Manual (Page 42)

82 83
Set and Select an FM Channel
The onyX allows you to easily store (i .e ., preset) up to 5 different FM channels .
At any time, you can select any one of these 5 FM presets to transmit audio from
the
onyX to your vehicle’s FM radio . Having a choice of 5 FM presets also makes
it easy to switch to the appropriate FM channel as you travel from one area to
another . Each FM preset is stored in its own storage location . You can easily add
or edit the FM preset in any one of the 5 storage locations .
IMPORTANT! The onyX and the vehicle’s FM radio need to be tuned to the same FM
channel in order to hear the audio .
TIP! The FM 1 storage location is preset with FM channel 97 .9 .
To set and select an FM preset:
1 Press menu .
2 Press to scroll to and highlight
FM Settings and press the Select
button .
3 FM Channels will be highlighted .
If it is not highlighted, turn on the
FM transmitter by highlighting
FM Transmitter and pressing Select .
4 Once the FM Transmitter is On, select FM Channels and press to
scroll to and highlight the storage location FM2 and press the Select
FM Channels
current
FM 1
FM 2
FM 3
FM 4
FM 5 97.9
99.3
103.7
_ _ _
_ _ _
Configuring Your onyX
button . You can choose among the following options:
i . If the chosen storage location is empty (denoted by “---“), or
if the storage location contains the FM preset currently being
used (denoted by “current”), then the FM channel tuning
screen is displayed .
ii . If the chosen storage location has an FM preset that is not
currently being used, and you want to edit it, Edit Channel is
highlighted . Press the Select button . The FM channel tuning
screen is displayed .
iii . If the chosen storage location has an FM preset that is not
currently being used, and you want to start using it, press to
highlight Start Using and press the Select button . Skip to step
7 .
5 Press and to tune the
desired FM channel in steps of
.2, i .e ., 99 .3 to 99 .5 . Press
and to tune the desired
channel in steps of 1, i .e ., 99 .3 to
100 .3 . Press the Select button
to select the FM channel .
6 If you are editing the storage
location that has the “current”
FM preset, skip to step 7 .
Otherwise, Start Using will be highlighted . Press the Select button .
NOTE! You can also preset an FM channel in a storage location without
having to start using it right away . Just press menu and exit the screen .
Edit FM Channel 2
99.3 FM
and Select to confirm
Press arrow keys to tune