Audiovox ONYX - Manual (Page 50)

98 99
Turn FM Transmitter On/Off
Turning the FM Transmitter On applies only if you are using the older model
Vehicle Dock from the Universal Xpress Car Kit, and plan to use PowerConnect or
FMDA as the audio connection option .
You’ll have to turn On the FM Transmitter under the FM Settings menu . However,
before you can access the FM Settings menu, you first need to disable AUX
Detect . Refer to “AUX Detect” on page 91 . Once you have disabled AUX Detect, the
FM Settings menu will be accessible .
To turn the FM Transmitter On:
1 Press menu .
2 Press to scroll to and highlight FM
Settings and press the Select
button .
3 FM Transmitter will be highlighted .
Press the Select button to toggle the
setting from Off to On .
4 The FM Channels menu item will now
be accessible, allowing you to tune
the onyX and the FM radio in your vehicle to the same FM channel .
TIP! onyX is programmed with FM channel 97 .9 as the default setting .
FM Settings
FM Transmitter
FM Channels
on
Configuring Your onyX
To turn the FM Transmitter Off:
If you are using the older model Vehicle Dock from the Universal Xpress
Car Kit, and plan to use the Aux In Cable or a Cassette Adapter as the audio
connection option, you’ll have to turn the FM Transmitter under the FM
Settings menu in the onyX Radio Off, if it was previously turned On .
1 Press menu .
2 Press to scroll to and
highlight FM Settings and
press the Select button .
3 FM Transmitter will be
highlighted . Press the Select
button to toggle the setting
from On to Off .
4 A warning message will be
displayed advising you to
connect the Aux In Cable .
Press the Select button to
confirm that you want to turn
off the FM Transmitter .
5 Press and hold menu to exit .
FM Settings
FM Transmitter
FM Channels
off
Please connect an AUX cable
or no audio will be available.
Press Select to confirm
Turn OFF FM?