Philips Robust Collection Robot de cuisine - Manual (Page 7)

caution
- Only connect the appliance to an earthed wall socket.
- Always unplug the appliance before you assemble, disassemble or
make adjustments to any of the parts.
- Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
- Do not exceed the top level indication on the bowl.
- Consult the table in this user manual for the correct quantities and
processing times.
- Never fill the bowl with ingredients hotter than 80ºC.
- If food sticks to the wall of the bowl, switch off the appliance and
unplug it. Then use a spatula to remove the food from the wall.
- Certain ingredients may cause discolourations on the surface of the
parts. This does not have a negative effect on the parts. The
discolourations usually disappear after some time.
- This appliance is intended for household use only.
- Noise level: Lc= 78 dB(A).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
safety features
thermal safety cut-out
This appliance is equipped with a thermal safety cut-out that automatically
cuts off the power supply to the appliance in case of overheating.
If the appliance stops running:
1 Remove the mains plug from the wall socket.
2 Let the appliance cool down for 1 hour.
3 Put the mains plug back into the wall socket.
4 Switch on the appliance again.
Please contact your Philips dealer or an authorised Philips service centre
if the thermal safety cut-out is activated too often.
Built-in safety lock
This feature ensures that you can only switch on the appliance if you
have assembled the bowl correctly on the motor unit and the lid
correctly on the bowl. If the bowl and the lid are assembled correctly
(see chapter ‘Using the appliance’), the built-in safety lock will be unlocked.
Before first use
For hygiene reasons, clean the bowl and all detachable parts properly by
hand with lukewarm water and some washing-up liquid.
using the appliance
general
- The appliance is equipped with a built-in safety lock that prevents it
from functioning if the bowl and lid are not assembled properly.
Food processor
1 Put the bowl on the motor unit (1) and turn it clockwise to fix it
(2) (Fig. 2).
2 Place the tool holder on the drive unit on the bottom of the bowl,
if you want to use one of the discs or the balloon beater.
If you want to use the blade unit or the kneading tool, you can place
them directly on the drive unit in the middle of the bowl without placing
the tool holder.
3 When you use the blade unit, the kneading accessory or the
balloon beater, first put the tool in the bowl and then the
ingredients to be processed.
4 Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it
(‘click’). The projection of the lid completes the shape of the
handgrip. (Fig. 3)
EnglisH 7