Philips Robust Collection Robot de cuisine User Manual
Page 9
1
Put the kneading accessory on the drive unit on the bottom of the
bowl (Fig. 14).
2
Put the ingredients in the bowl (Fig. 15).
3
Put the lid onto the bowl (1) and turn it clockwise to close it (2).
Insert the pusher in the feeding tube to prevent spillage (Fig. 16).
4
Press speed button 1.
Never leave the appliance unattended when it is kneading.
5
When you have finished processing, press button 0.
Double balloon beater
You can use the double balloon beater to whip cream and to whisk eggs,
egg whites, instant pudding, mayonnaise, sponge cake mixture and other
soft ingredients.
tips
- Do not use the balloon beater to prepare cake mixtures with butter
or margarine or to knead dough. Use the kneading accessory for
these jobs.
- Make sure the bowl and the balloon beater are dry and free from
grease when you whisk egg whites. To get the best results the egg
whites should be at room temperature.
1
Put the tool holder on the drive unit on the bottom of the
bowl (Fig. 10).
2
Put the balloon beater on top of the tool holder (Fig. 17).
3
Put the ingredients in the bowl (Fig. 18).
4
Put the lid on the bowl (1) and turn it clockwise to close it (2).
Insert the pusher in the feeding tube to prevent spillage (Fig. 19).
5
Press speed button 1.
6
When you have finished processing, press button 0.
7
Always clean the balloon beater after use.
See chapter ‘Cleaning’ for instructions on how to clean the balloon beater.
cleaning
1
Make sure the appliance is switched off and unplugged.
2
Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap.
3
Clean the parts that have come into contact with food in hot water
with some washing-up liquid immediately after use.
Clean the blade unit and the discs very carefully. The cutting edges are
very sharp.
Note: All parts, except the motor unit can also be cleaned in the dishwasher.
- Make sure that the cutting edges of the blade and the discs do not
come into contact with hard objects. This could cause them to
become blunt.
Balloon beater
Always clean the balloon beater immediately after use.
You can disassemble the balloon beater for thorough cleaning.
1
Pull the beaters out of the bracket (Fig. 20).
2
Clean all parts in hot water with some washing-up liquid or in the
dishwasher.
3
Reinsert the beaters in the bracket after cleaning them.
storage
1
Store the mains cord in the cord storage groove by winding it
round the base of the motor unit (Fig. 21).
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 22).
EnglisH
9