MicraDigital P74847ea-A - Manual (Page 12)

Basic Installation Procedure
1. Connect the LAN: Connect the Wireless Router to your PC, or to a hub
or switch. Run Ethernet cable from one of the LAN ports on the rear of the
Wireless Router to your computer’s network adapter or to another network
device. You may also connect the Wireless Router to your PC (using a
wireless client adapter) via radio signals.
2. Connect the WAN: Use an Ethernet cable for connecting the Wireless
Router to a cable/xDSL modem or Ethernet router.
3. Power on: Connect the power adapter to the Wireless Router.
Figure 2. Example Network Configuration
8
SOHO Office or Residence
Notebook with
Wireless PC Card
Internet
Access
Device
Wireless Router