MicraDigital P74847ea-A - Manual (Page 18)

Obtain IP Settings from Your IEEE 802.11g Wireless Router
Now that you have configured your computer to connect to the Wireless
Router, it needs to obtain new network settings. By releasing old IP settings
and renewing them with settings from the Wireless Router, you will also verify
that you have configured your computer correctly.
1. On the Windows desktop, click Start/Programs/Command Prompt.
2. In the Command Prompt window, type ipconfig /release and press the Enter
key.
3. Type ipconfig /renew and press the Enter key. Verify that your IP Address
is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default
Gateway is 192.168.2.1. These values confirm that the Wireless Router is
functioning.
4. Type exit and press Enter to close the Command Prompt window.
14