MicraDigital P74847ea-A - Manual (Page 20)

Configuring a Macintosh Computer
You may find that the instructions here do not exactly match your screen.
This is because these steps and screen shots were created using Mac OS
10.2. Mac OS 7.x and above are all very similar, but may not be identical to
Mac OS 10.2.
1. Pull down the Apple Menu. Click System Preferences and select Network.
2. Make sure that Built-in
Ethernet is selected in the
Show field.
3. On the TCP/IP tab, select
Using DHCP in the
Configure field.
4. Close the TCP/IP
dialog box.
16