MicraDigital P74847ea-A - Manual (Page 13)

9
Attach to Your Network Using Ethernet Cabling
Use twisted-pair cable to connect any of the four LAN ports on the Wireless
Router to an Ethernet adapter on your PC. Otherwise, you can cascade any of
the LAN ports on the Wireless Router to an Ethernet hub or switch, and then
connect your PC or other network equipment to the hub or switch. When
inserting an RJ-45 plug, be sure the tab on the plug clicks into position to
ensure that it is properly seated.
Warning: Do not plug a phone jack connector into any RJ-45 port. This may
damage the Wireless Router. Instead, use only twisted-pair cables
with RJ-45 connectors that conform with FCC standards.
Figure 3. Making a LAN Connection