Boundless Technologies ADDS 3153 ASCII - Manual (Page 19)

6 Introduction
Usage Notes
The following notations and symbols are used in this manual:
§ Ctrl-F1 : the two keys, Ctrl and F1 , are to be pressed simultaneously.
§ Ctrl, F1 : the two keys, Ctrl and F1 , are to be pressed in succession.
§ 1-num or 1-alph : specifies that the number must be generated either from the
numeric or the alphanumeric keypad.
§ 23h : the number 23 is represented in hexadecimal (hex) notation.
§ applies to ASCII emulations only : ADDS-VP, Wyse 50+, Wyse 60, PC
Term, and TVI-925.
§ applies to ANSI emulations only : VT300/8, VT300/7, VT200/8,
VT200/7, VT100, SCO Console, and AT386.
§ applies to SCO Console and AT386 emulations only.
§ applies to IBM 3151 emulation only .
§ applies to parallel attribute emulations only which includes all emulations
except ADDS-VP and Wyse 50+ (which are field attribute emulations).
§ applies to ASCII key-mode only .
§ applies to Scan Code-key mode only .
§ applies to the PC-style keyboards (PC+ and EPC) only.
§ applies to the ANSI keyboard only.