Boundless Technologies ADDS 3153 ASCII - Manual (Page 59)

EMULATION: F9 49
lines and the previous current line moves down one line. The bottom line is then
discarded.
§ Character – If there is no space to insert a character and an insert character
operation is requested, a character can be inserted at the cursor position.
However, the last character of the current line is discarded when the line wrap
parameters is off, or the last character of the page (or field in a formatted page) is
discarded when line wrap is on.
§ Both – Enables the line and character functions
Set Control: [ Temporary , Permanent ]
§ Temporary – Set Control commands do not replace the values stored in
NVRAM. Only the working setup parameters are modified.
§ Permanent – The Set Control commands update both the working setup
parameters as well as the NV setup parameters.
Status Line: [Off, Indicator, Host-Write, Both]
Specify the way in which the status line is to be used: for host messages [host -write], as
a cursor position indicator [indicator], for [both] or off.
Char Set: [Multinational, National]
Select whether the character set used is from the 7-bit national chart or the 8 -bit
multinational chart. The default is the 8-bit multinational character set except when
the emulation is VT100.
WP-Graphics: [Off, On]
Selects whether Word Perfect Graphics commands are processed or ignored.