Boundless Technologies ADDS 3153 ASCII - Manual (Page 58)

48 Setup
Bright Video: [Off, Mode 1, Mode 2]
Provides a brighter display when set to Mode 1 or Mode 2. In Mode 1, both normal
and dim text are brighter than in the standard mode. In Mode 2, only normal text is
brighter, resulting in a greater contrast between normal and dim text.
This parameter setting affects both sessions, but will not affect an ANSI emulation
in the inactive session.
WP-Graphics: [Off, On]
Selects whether Word Perfect Graphics commands are processed or ignored.
ANSI Emulations
Numeric Kpd: [Numeric, Application]
Choose the set of strings sent by the numeric keypad.
Cursor Kpd: [Cursor, Application]
Choose the set of strings sent by the cursor control keypad.
Send Data: [All, Erasable]
Choose whether the data sent to the host is all data (erasable and selectively erasable) or
only those characters tagged as erasable.
ANSI-ID: [VT100, VT101, VT102, VT220, VT320]
Select the terminal’s identification.
Function Key Lock: [Off, On]
Select whether the function keys are locked or modifiable by the host.
Key Usage: [Typewriter, Data Process]
This selection is available for all language selections except U.S. It applies to keys that
have two characters printed side-by-side to select which character is sent by that key.
Typewriter selects the character printed on the left side while Data Process selects the
character printed on the right side of the keycap.
Char Set: [Multinational, National]
Select whether the character set used is from the 7-bit national chart or the 8 -bit
multinational chart. The default is the 8-bit multinational character set except when
the emulation is VT100.
Feature Lock: [Off, On]
When on, the host cannot change user features: key repeat, scroll speed, screen
background, tab stops, and keyboard lock.
Status Line: [Off, Indicator, Host-Write, Both]
Specify the way in which the status line is to be used: for host messages [host -write], as
a cursor position indicator [indicator], for [both] or off.
IBM Emulation
Forcing Insert: [Off , Line, Character, Both ]
§ Off – If there is no room to insert a character or line, the insert operation will not
be performed.
§ Line – If there is no room to insert a null line and an insert line operation is
requested, the current line is replaced with a null line and the remaining lower