Boundless Technologies ADDS 3153 ASCII - Manual (Page 60)

50 Setup
TABS: F10
F1
Quick F2
Genrl F3
Displ F4
Kybd F5
Keys F6
Ports F7
Host F8
Print F9
Emul F10
Tabs F11
AnsBk F12
Prog Print
Exec
Parameters
Auto Init Tabs = Off Default Tabs Tab=Field
10 20 30 40 50 60
....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.
70 80 90 100 110 120 130
... ↑ ....:.... ↑ ....:.... ↑ ....:.... ↑ ....:.... ↑ ....:.... ↑ ....:.... ↑ ..
Choices
Off On
Select
↑ → ↓ ← : Parameter Enter/S-Enter : Next/Prev Choice Exit : Setup Key
Auto Init Tabs: [On, Off]
When on, tab settings will always be defaulted at power up.
Default Tabs: This action field sets tabs at every eighth column starting at column 9.
When the cursor is placed in the Tab Map, the keys below will appear in the Choices
field:
§ <Space> – clear the current tab setting.
§ <Shift> <Backspace> – clear all tab settings.
§ <T or t> – set a tab at the current location.
§ < ↑ → ↓ ← > – move cursor on the Tab map or back to a Parameter field
above the map.
Tab: [ Field, Column]
§ Field – On a formatted page, the tab stops are defined by the field attribute
characters displayed on the screen.
§ Column – The column tab stops are used while ignoring the field attribute
characters.