BT 106 - Manual (Page 19)

choice. By recording a looped tape you can also
play a message for your callers which will
continually repeat.
In program mode.
81# Enter this code. Callers put on hold will
automatically hear the pre-set tune.
In program mode.
82# Enter this code.
Remove any jackplug from the music
on hold socket.
In program mode.
Plug your CD or cassette tape player
jackplug into the music on-hold socket.
Set your CD or cassette player to
PLAY .
82# Enter this code. Callers put on hold will
be played the music or message.
You can stop external music on-hold by
removing the jackplug from the music
on-hold socket.
To play the pre-set music on hold
tune (default setting)
To disable the pre-set tune
To reset all except speed dial names
and numbers, OGMs and voicemail
messages
17
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
To play your own choice of music
or message
Switch to program mode.
91#1
✱
0
✱
6
✱ Enter this code.
# To confirm. The Ultimate 106 will
announce:
“System reset” .
Set switch back to normal mode.
Hang up handset and wait 30 seconds
until IN USE light goes out.
Do NOT switch off power until IN USE
light goes out.
This resets the system completely and
clears all settings.
In program mode.
92#1
✱
0
✱
6
✱
Enter this code.
# To confirm.
Playing music to callers on hold
You can play music to callers who are put on
hold while waiting to be connected to one of the
extensions.
Your Ultimate 106 lets you choose between
playing a pre-set tune or connecting a CD or
cassette player to play the music of your
To reset the system
IMPORTANT
After you have programmed your system
settings you must set the program switch
to NORMAL.