BT 106 - Manual (Page 22)

20
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
To turn Call Director ON, from any
extension
When in normal mode.
From the extension you wish to switch
on voicemail:
81# Enter this code to switch your extension
voicemail on.
When in normal mode.
86# Enter this code, your Ultimate 106
announces
“Call Director is on” .
When in normal mode.
87# Enter this code, your Ultimate 106
announces
“Call Director is off” .
To switch individual extension
mailboxes on
To turn Call Director OFF, from any
extension
Press keypad buttons in order shown
In normal mode.
36# Enter this code.
0 Enter 0 .
To set up Call Director
Set the Normal/Program switch to
PROGRAM .
From extension 11 only.
83# Enter this code, your Ultimate 106
announces
“Call Director is set” .
Hang up.
Set the Normal/Program switch to
NORMAL .
If you wish callers to be directed straight
to the Call Director OGM without
ringing any of your extensions, first a
ring delay of 2 must be set on each
extension. Please see page 11 and 19.
To delete your outgoing message and
use the system default OGM
To select Call Director mode
IMPORTANT
You cannot switch between Call Director and
Answering Machine modes if there are any
messages stored in the system. You must delete
any messages before switching (see page 23).