Please record your outgoing message after the tone, Press square to confirm, Answering delay is set – BT 106 User Manual
Page 21: Answering delay is two rings, Answering delay is six rings, Answering delay is nine rings, Answering machine is on, Answering machine is off
19
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
In normal mode.
36#
Enter this code, your Ultimate 106
announces
“Please record your outgoing
message after the tone”
.
Example of OGM
“Hello. I’m sorry we can’t take your
call at the moment, but if you leave
a message we’ll call you back. Please
speak after the tone”.
#
To stop recording. The Ultimate 106
replays your OGM, and then announces:
“Press square to confirm”
.
#
To save your OGM or hang-up to abort
without saving the message.
In normal mode.
36#
Enter this code, your Ultimate 106
announces
“Please record your outgoing
message after the tone”
.
✱
Press while the voice is announcing this
message, and your outgoing message
will be replayed.
To replay your outgoing message
To record an outgoing message
(OGM)
To turn answering machine on, from
any extension
Set Normal/Program switch to
PROGRAM
.
From extension 11 only.
6
Enter this code.
3#
Toll saver (answers after 6 rings if
there are no new messages in mailbox 1,
after 2 rings if there are new messages
in mailbox 1). Your Ultimate 106
announces:
“Answering delay is set”
.
Or
4#
2 rings. Your Ultimate 106 announces:
“Answering delay is two rings”
.
Or
5#
6 rings. Your Ultimate 106 announces:
“Answering delay is six rings”
.
Or
6#
9 rings. Your Ultimate 106 announces:
“Answering delay is nine rings”
.
When in normal mode.
86#
Enter this code, your Ultimate 106
announces
“Answering machine is on”
.
When in normal mode.
87#
Enter this code, your Ultimate 106
announces
“Answering machine is off ”
.
To set the ring delay for Answer
Machine/Call Director
To turn answering machine off, from
any extension