BT 106 - Manual (Page 30)

28
Ultimate 106 – Edition 1 – Issue 3 - 18.12.02 – 5129
Using Ringback
You can set your Ultimate 106 to tell you when
engaged extensions or telephone numbers are
free again.
Your Ultimate 106 can be set to call you
back when an engaged extension or
external line you have dialled becomes
free again.
Before replacing the handset:
RECALL
5 Replace the handset. When the extension
becomes available, your handset will ring
for 30 seconds. When you pick up the
handset, the voice announces:
“Ringback Extension X” or “Ringback
external line” . Then the extension you
are calling rings. Automatic extension
Ringback does not apply to the
doorphone.
Using your Ultimate 106 as
a Room Monitor
You can use extensions on your Ultimate 106 to
monitor sounds.
Press keypad buttons in order shown
To hear the sounds close to an
extension:
Lift the receiver.
80# Enter this code on the extension phone
and leave the receiver off hook.
When that extension is dialled from
any other extension, you can hear the
sounds at the off-hook extension instead
of an engaged tone.
To set the Room Monitor
To set automatic internal Ringback
By using speakerphones as extensions,
it is possible for 2-way communication
between the extension on Room Monitor and
another extension.
PLEASE NOTE
If you lift the handset while waiting for
Ringback, the internal Ringback request
is cancelled.